PART IVb. The Guillocheur Interactive

Feb 27, 2008,23:40 PM
 

Master guillocheur Supachai Wattanakanokthan demonstrates how to use the guilloche turning machine, and he's been guilloche'ing for 16 years!  I noticed that his name sewed onto his white lab coat only had part of his last name, and he chuckled that his Thai name is so long that the space where his name is sewed onto his white lab coat is too short.  Just something silly I remembered :P


With your right hand, you push in to move the blade inward to the dial, and with your left hand, you turn a wheel (sorry not pictured) to make the blade move upwards on the dial to form the guilloche pattern.  



Once you finish guilloche'ing that line, you then have to adjust the 2 knobs circled in red to proceed to the next line, and you have to remember how many turns on each knob because they decrease and increase at a different set interval each time, so if you forget which interval you're at, you have to start over!  (I hope I am describing this correctly!)


Look I can guilloche without looking at the dial? :P  (just joking of course!)


 
Here's a video of Supachai in action!
 
This message has been edited by AnthonyTsai on 2008-02-28 09:17:30

  login to reply

Comments: view entire thread

 

Vacheron Constantin's Métiers d'Art interactive watchmaking exhibition in Beverly Hills

 
 By: AnthonyTsai : February 27th, 2008-21:24
Vacheron Constantin opened up its Métiers d'Art "The master craftsmen of time" interactive watchmaking exhibition on Wed February 27, 2008 at Sotheby's in Beverly Hills. I felt very lucky to be invited to this amazing exhibit, and I also had the opportuni...  

were you there, AT?

 
 By: SteveH : February 27th, 2008-21:48
I was there from 630-645ish. Went back over to the hotel but the suite was completely empty.

PART Ia. The Master Watchmaker

 
 By: AnthonyTsai : February 27th, 2008-21:51
...  

PART Ib. The Master Watchmaker Interactive

 
 By: AnthonyTsai : February 27th, 2008-22:04
Here's master watchmaker Mikael Conus assembling a tourbillon. At the age of 14, he began watchmaking school and finished at 18 yrs old; and since then, has been in the watchmaker profession for 10 years already. You wouldn't know he's already been doing ...  

added video inside [nt]

 
 By: AnthonyTsai : February 28th, 2008-09:45

PART IIa: The Enameler

 
 By: AnthonyTsai : February 27th, 2008-22:32
...  

PART IIb. The Enameler Interactive

 
 By: AnthonyTsai : February 27th, 2008-22:54
Here's me on the right looking through the microscope watching master enameler Jean Genbrugge apply some blue enamel on a dial. He's been an enameler for 30 years. On the very left is Lucie Misselyn who is still learning enameling for 1.5 years, and both ...  

PART IIIa. The Engraver

 
 By: AnthonyTsai : February 27th, 2008-23:13
...  

Fantastic report, AT

 
 By: amanico : February 27th, 2008-23:26
Sems that you had a big time, and that you saw some marvellous pieces... Now, I know where to complain if I have an issue with my enamel dial! LOL Best. nicolas

Hhehe LOL yup!

 
 By: AnthonyTsai : February 28th, 2008-09:59

PART IIIb: The Engraver Interactive

 
 By: AnthonyTsai : February 27th, 2008-23:38
Here's master engraver Jeanne Ulrich who has been engraving for 7 years, and she says it takes around a week to engrave an entire movement. Here's a monogram engraving. Here's a video clip of Jeanne in action! This message has been edited by AnthonyTsai o...  

added a video inside (nt)

 
 By: AnthonyTsai : February 28th, 2008-08:49

PART IVa. The Guillocheur

 
 By: AnthonyTsai : February 27th, 2008-23:39
...  

PART IVb. The Guillocheur Interactive

 
 By: AnthonyTsai : February 27th, 2008-23:40
Master guillocheur Supachai Wattanakanokthan demonstrates how to use the guilloche turning machine, and he's been guilloche'ing for 16 years! I noticed that his name sewed onto his white lab coat only had part of his last name, and he chuckled that his Th...  

added video inside (nt)

 
 By: AnthonyTsai : February 28th, 2008-09:19

PART V: Métiers d'Art - Les Masques

 
 By: AnthonyTsai : February 28th, 2008-00:59
These 4 masks of the Métiers d'Art - Les Masques belong to a private collection at the Barbier-Mueller Museum in Geneva and highlights Vacheron's dedication to the art of engraving in watchmaking. 25 sets of these 4 mask watches will be made, and you must...  

I really don't get the mask collection

 
 By: SteveH : February 28th, 2008-07:31
I can't imagine wearing one or anyone wanting to wear one. Am I missing something? Is there some culture in the world where this makes more sense?

Art would.......

 
 By: MTF : February 28th, 2008-21:03
No - not our Art (Dr No) but for the sake of art. The celebration of the Arts & Crafts could be a driver like people who buy watches with dragon mokugane, lacquered or engraved dials. In this VC range, the decoration is brought forward as a shield/mask to... 

Totally agree MTF

 
 By: Z3 : February 28th, 2008-22:00

Wonderful reporting, Anthony....

 
 By: WHL : February 28th, 2008-11:29
You've given me enough excellent pictures that I can change the masthead weekly for a long time to come! Thanks, Bill

I can't believe it's almost 1:20 AM . . .

 
 By: Dr No : February 29th, 2008-01:23
. . . well past my bedtime, and I'm scrolling up and down this post like a kid who's just discovered a fascinating book . . . thanks, Anthony, for reporting of an event that I would've made time for if I'd known all of what was on display in advance . . .... 

The exhibition is still on display until Saturday

 
 By: AnthonyTsai : February 29th, 2008-07:58
so you can still go if you want to see the exhibition. See you later today! - Anthony This message has been edited by AnthonyTsai on 2008-02-29 07:58:52

I'm burned ...... [nt]

 
 By: Ares501 - Mr Green : February 28th, 2008-13:57

Thanks Anthony,

 
 By: papillonwatchman : February 28th, 2008-20:29

Wow, great report! I thought I spent a lot of time at the exhibition..

 
 By: Allen : February 29th, 2008-21:38
you must have been there all day to take all these pictures! It's so nice for you to have posted everyone's names because I sure couldn't remember. Thanks, Anthony! I sat with Mikael at dinner and talked extensively about watchmaking. He's really an aweso...